Chassis and Dust Covers - Churchill Corporation

Services

Employment

FAQs

Chassis and Dust Covers are fabricated out of lightweight 5052 H32 aluminum.
The units feature a unique "box within a box" design that provides easy access to installed equipment.
The Dust Cover includes top, side and rear cover with top/bottom ARINC-standard perforation pattern to accommodate convection or forced air cooling.
The units can be fabricated to accommodate either ARINC 404A (1/4 thru 1 ATR) or ARINC 600 (2 MCU thru 12 MCU) sizes/configurations.
The rear connector plate of the chassis mates with the dust cover with a 1/4 turn DZUS fastener for locking engagement.
The units include include a variety of rear connector configurations per ARINC 404/600.

See also Hooks & Handles

Modifying Chassis and Dust Covers to meet production design changes:

Churchill is often asked if standard enclosures can be modified to incorporate design changes made during preproduction... The answer is YES. Based on a library of 3-Solid CAD models and an enormous selection of tooling, we can make significant changes to the standard design.
Changes often include modifying the front panel; adding mounting holes and related hardware; silk-screening; card cages and card guides; bracketry and custom finishes.
Our philosophy has always been to manufacture standard and custom enclosures for demanding packaging applications, especially those that require tight tolerances and small quantities.


	Churchill Corporation • 344 Franklin Street • Melrose, MA 02176 USA Tel: 781-665-4700 • 1-800-225-3932 • Fax 781-662-5291 • e-mail: sales@atrbox.com	HOME \| ^Top \| © 2008, Churchill Corporation